lm324N Ti Op Amps Quad Pinout and Pin Functions, Specifications
1/19/2026 11:47:03 PM
1. Model Overview
LM324N is a classic quad operational amplifier that integrates four independent, high-gain op amps into a single 14-pin PDIP package. It is designed to operate from a single power supply over a wide voltage range, while still supporting split-supply operation when required. One of the key advantages of the LM324N is its ability to handle input signals that include ground level, making it especially suitable for single-supply and low-power analog circuits. Thanks to its long market history, stable performance, and wide availability, LM324N remains a popular choice in both industrial and consumer electronic designs.
2. Key Features
The LM324N offers a well-balanced combination of performance, flexibility, and cost efficiency:
Wide supply voltage range (single supply or dual supply operation)
Input common-mode voltage range includes ground
Low quiescent current, suitable for power-sensitive designs
Internally frequency-compensated for unity-gain stability
High differential input voltage capability
Available in a standard 14-pin PDIP package for easy prototyping and replacement
These characteristics make the LM324N a reliable solution for general-purpose analog signal processing.
3. LM324N Pinout and Pin Functions
PIN NO.
TYPE
NAME
DESCRIPTION
2
Input
1IN-
Negative input
3
Input
1IN+
Positive input
1
Output
1OUT
Output
6
Input
2IN-
Negative input
5
Input
2IN+
Positive input
7
Output
2OUT
Output
9
Input
3IN-
Negative input
10
Input
3IN+
Positive input
8
Output
3OUT
Output
13
Input
4IN-
Negative input
12
Input
4IN+
Positive input
14
Output
4OUT
Output
11
—
VCC-
Negative (lowest) supply or ground (for single-supply operation)
4
—
VCC+
Positive (highest) supply
4. LM324N Specifications
Product Attribute
Attribute Value
Manufacturer:
Texas Instruments
Product:
Operational Amplifiers
RoHS:
Yes
Number of Channels:
4 Channel
GBP - Gain Bandwidth Product:
1.2 MHz
SR - Slew Rate:
500 mV/us
Vos - Input Offset Voltage:
7 mV
Ib - Input Bias Current:
250 nA
Supply Voltage - Max:
32 V
Supply Voltage - Min:
3 V
Operating Supply Current:
175 uA
Output Current per Channel:
20 mA
CMRR - Common Mode Rejection Ratio:
80 dB
en - Input Voltage Noise Density:
35 nV/sqrt Hz
Package/Case:
PDIP-14
Minimum Operating Temperature:
0 C
Maximum Operating Temperature:
+ 70 C
Series:
LM324
Dual Supply Voltage:
+/- 3 V, +/- 5 V, +/- 9 V
Input Type:
Rail-to-Rail
Ios - Input Offset Current:
150 nA
Length:
19.3 mm
Maximum Dual Supply Voltage:
+/- 16 V
Minimum Dual Supply Voltage:
+/- 1.5 V
Operating Supply Voltage:
3 V to 32 V, +/- 1.5 V to +/- 16 V
PSRR - Power Supply Rejection Ratio:
100 dB
Subcategory:
Amplifier ICs
Supply Type:
Single, Dual
Vcm - Common Mode Voltage:
0 V to 28 V
Voltage Gain dB:
100 dB
5.LM324N Alternative Parts (Equivalents & Replacements)
Several devices can be used as direct replacements or functional equivalents for the LM324N, depending on performance and application requirements:
LM358 / LM358N A dual operational amplifier with similar electrical characteristics. Suitable when only two op amps are required, helping reduce board space and cost.
LM2902 An industrial-grade version of the LM324 family, offering extended temperature range and improved robustness for harsher environments.
LM324B / LM324BA Next-generation upgrades of the LM324N, featuring lower input offset voltage, improved EMI rejection, and better ESD protection. These are drop-in replacements in most designs.
TL084
A JFET-input quad op amp with higher input impedance and faster response, often used in audio or precision applications where the LM324N may not be sufficient.
6. LM324N Functional Block Diagram
7. LM324N Application Scenarios
The LM324N is widely used across many industries due to its versatility and reliability:
Sensor signal conditioning (temperature, pressure, current sensing)
Power supply monitoring and feedback circuits
Audio pre-amplification and tone control circuits
Battery-powered and portable devices
Industrial control and automation systems
Consumer electronics and educational projects
Its stable performance and low cost make it especially attractive for mass-production designs and long-lifecycle products.
8. LM324N project Case Learn
How to Make Active Tone Controls Circuit - Bass / Mid / Treble / Control Circuit LM324N
How to make a 12V to 24V DC Boost Converter using LM324 IC, How does it work, Full Tutorial
Please check your inbox to see if you have received the first email from ICseekers.
If you do not receive it within 5 minutes, please check your spam folder or contact us via the website.